Neumann BCM 705 på emusic.se - Sveriges musikaffär på nätet.
30 dagars öppet köp
Fri frakt över 1000 kr
Dela upp din betalning
Över 40 000 artiklar

Just nu pågår VÅR-REA

Neumann BCM 705

Dynamisk broadcastmikrofon med integrerat puffskydd, hypernjure

Emotion conveyed with technical perfection. This is the ideal which the Neumann microphones in the Broadcast Line have been designed to fulfill. The fine-tuning to the requirements of professional broadcast studios and the individual, functionally optimized design* ensure that these are microphones of character.

The BCM 705 is Neumann’s first dynamic microphone. The principle of reduction to the essentials can be seen in the dynamic capsule with a hypercardioid directional characteristic, specifically designed for speech reproduction at close range. Multi-level isolation from structure-borne noise ensures operation free of interference, even in a lively studio environment.


Mechanical Features
The microphone headgrille twists off easily for quick cleaning. Neumann offers optional, color-coded headgrilles so that, for reasons of hygiene, each announcer can use his or her individual headgrille.

The microphones of the Broadcast Line have an elastic mount against structure-borne noise, that is compatible with standard broadcast-segment microphone arms.

Acoustic features
The frequency response has a light treble boost, in the region from 2 kHz to 9 kHz, aiding the speech intelligibility. The bass frequency response is designed to compensate for the overemphasis of the bass caused by the proximity effect.

The integrated Pop Screen
A pop screen not only prevents the occurrence of plosive pop noises in vocal recordings, but also efficiently prevents unwanted particles, from respiratory moisture, nicotine, to food remnants, from settling on the diaphragm.
Läs vidare

Specifikationer

Technical Data BCM 705
Acoustical operating principle Pressure grad. transducer
Directional pattern Hypercardioid
Frequency range 20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm 1.7 mV/Pa
Rated impedance 200 ohms
Rated load impedance 10 kohms
Equivalent noise level, CCIR 32 dB
Equivalent noise level, A-weighted 18 dB-A
Signal-to-noise ratio, CCIR 62 dB
Signal-to-noise ratio, A-weighted 76 dB
Maximum SPL for THD 0.5% 140 dB
Maximum SPL for THD 0.5% with preattenuation 150 dB
Maximum output voltage 10 dBu 
Supply voltage (P48, IEC 61938) 48 V ± 4
Current consumption (P48, IEC 61938) 2 mA
Weight 500 g
Diameter 64 mm
Length 85 mm
Height 110 mm

Kundbetyg

Snittbetyg Neumann BCM 705
(0 recensioner)
Logga in för att lämna en recension.

Relaterade artiklar från emusic-mag

Behöver du hjälp med köpet?

08-400 23 600

mån-fre 11:00-16:00